|
|
|
A752 |
|
|
|
|
|
specifications |
|
General Specification
General Specification
Frequency range |
100 ~ 900MHz (2.4GHz) |
RF Unit |
Microprocessor controlled PLL synthesizer with up to 8 selectable frequency |
RF Strength |
10mW standard |
Modulation |
FM |
CH, Spacing |
12.5KHz |
Comm. Range |
Approx. 100 meters with standard antenna |
Address |
16-bit(65,536) |
Temperature range |
-25℃ ~ 70℃ |
Humidity range |
0 ~ 97% |
Response time |
Approx. 120msec |
Baud rate |
2400bps |
Transmitter
Battery
Housing material |
ABS |
Environmental protection |
IP65 |
Weight |
Less than 2.5kg (including battery) |
Operating time |
12 hours |
Joystick |
5-Proportional Joysticks (1 x 5 Axis) |
Functions |
12 ch. switch input (functions) Power switch Emergency switch Frequency change switch |
Display |
Operating & Power LED Low battery LED |
Size |
335 x 180 x 188 |
Receiver
Receiver
Environmental protection |
IP65 |
Housing material |
ABS |
Weight |
Less than 3kg |
Current draw |
< 0.3A (No load) |
ON/OFF output capacity |
30Vdc / 5A |
Power |
12Vdc ~ 30Vdc |
Proportional output |
12 ch. proportional output current output or voltage output |
Proportional resolution |
10bit (1024 step) |
Current output capacity |
max 1A or 2A |
Proportional adjustment |
Imax, Imin, Frequency, ramptime or Vmax, Vmin, ramptime |
ON/OFF output |
16 Relay output, 5A |
Display |
Power & Communication status Emergency & Frequency channel status |
Size |
240 x 237 x 114 |
Battery Charger
Battery Charger
Power |
12 ~ 30Vdc |
Charging time |
< 2.5 hours |
Charging current |
500mA |
Battery
|
|